HXD-2000TM顯微硬度計
型號Type |
HXD-2000TM |
物鏡/壓頭切換Lens/Indenter switch |
在自動轉塔切換
With Motorized Turret |
試驗力
Test force |
19.61, 9.807, 4.903, 2.942, 1.961, 0.9807, 0.4903, 0.2452, 0.0981 N
2000,1000,500,300,200,100,50,25,10 gf |
加荷方式
Loading mode |
程控自動試驗力加載,保持和卸載
Program-controlled application, duration and removal of load |
保荷時間Duration |
5 – 60 sec 可選selectable, 步長(In step of ) 5 sec. |
硬度測試范圍Measuring range |
5 HV – 3000 HV |
測量顯微鏡Microscope |
物鏡Objective: 40x; 10x(觀察用 observation only),
目鏡Eyepiece: 15x
總倍率Total: 600x; 150x(觀察用For observation only) |
最小檢測單位
Min. detection |
0.025 µm |
光路切換Optical path |
雙光通道(目鏡/CCD攝像頭)Measurement / Photo switch |
X-Y工作臺stage |
尺寸Dimensions:100 x 100 mm
移動范圍Travel range:25 x 25 mm
最小讀數:0.01 mm |
測量讀數方式Reading mode |
用目鏡測量,LCD顯示硬度值。
Measurement with the eyepiece and the hardness value is displayed on LCD. |
數據輸出
Data output |
數字顯示試驗力,保荷時間,D1,D2,硬度值,平均值,分散度,標準偏差,HRC,HRA,HRB換算值,硬度梯度曲線圖等。內置打印機提供測試報告。RS-232輸出接口
On LCD display:Load, Dwell, D1, D2, H values, Min, Max, Average, Divergence, S deviation, Converted HRC, HRA, HRB, and H gradient graph. |
試件最大高度
Max. test height |
90 mm |
主要標準配件,附件Main standard
Accessories & attachments |
物鏡(在機上)Objective 40x, 10x (Installed on tester)
維氏壓頭(在機上)Vickers indenter (Installed on tester)
標準硬度塊Standard hardness block (700HV & 400HV)
薄片夾緊器Sheet specimen clamp
小圓柱體夾緊器Thin cylinder clamp
平口鉗Parallel-jaw vice
小水平儀Circular bubble leveler
內置打印機Built-in printer
SDE-100數碼顯微攝像目鏡Digital microscopic eyepiece with software |
選購件Options |
努氏壓頭
數碼相機及適配鏡
金相分析軟件
HXD-2000TMJC:X-Y步進工作臺(尺寸:120x100 mm, 移動范圍:40x40mm,分辨率:0.1 µm, 控制:控制箱或測試軟件) |
執行標準(或參照)
Standards concerned |
中國國家標準 GB/T 4340.2-1999
國際標準ISO 6507,美國標準ASTM E384,日本標準 JIS B7734 |
電源Power supply |
220 VAC, 50 Hz |
尺寸Dimensions |
凈尺寸Net:50x25x56 cm, 包裝尺寸Packing:59x47x67 cm |
重量Weight |
凈重Net 40kg, 毛重Gross 60 kg |