The highly accurate EE32/33 series transmitters are designed for fast and reliable measurement of relative humidity / dew point temperature / absolute humidity / ...under the most demanding conditions. Neither condensation nor heavy chemical pollutions will affect prompt and reliable measurements. Process pressures as high as 100 bar (1450 psi) and continuous high humidity are also no problem for the EE32/33 series. The core of the EE32/33 series is the new monolithic thin-film measurement cell type manufactured by E+E Elektronik. The sensor element includes a heater that is periodically activated to burn off dirt and chemicals that otherwise could threaten long-term operation and stability. Chemical contamination and also condensation will actually evaporate due to the innovative design of the HMC1 measurement cell. The monolithic construction of the sensor allows a fast return to normal conditions and a continuation of the measurement. Additionally, a special corrosion resistant environmental coating is available as an option in very dirty and corrosive envoroments. (Note the coating will slightly affect sensor response time, typically from 6 seconds to 30 seconds for a T90 measurement. The configuration software included in the scope of supply allows user friendly setup of the operation / sensor heating mode as well as selection and adjustment of the electrical outputs.
The highly accurate EE32/33 series transmitters are designed for fast and reliable measurement of relative humidity / dew point temperature / absolute humidity / ...under the most demanding conditions. Neither condensation nor heavy chemical pollutions will affect prompt and reliable measurements. Process pressures as high as 100 bar (1450 psi) and continuous high humidity are also no problem for the EE32/33 series. The core of the EE32/33 series is the new monolithic thin-film measurement cell type manufactured by E+E Elektronik. The sensor element includes a heater that is periodically activated to burn off dirt and chemicals that otherwise could threaten long-term operation and stability. Chemical contamination and also condensation will actually evaporate due to the innovative design of the HMC1 measurement cell. The monolithic construction of the sensor allows a fast return to normal conditions and a continuation of the measurement. Additionally, a special corrosion resistant environmental coating is available as an option in very dirty and corrosive envoroments. (Note the coating will slightly affect sensor response time, typically from 6 seconds to 30 seconds for a T90 measurement. The configuration software included in the scope of supply allows user friendly setup of the operation / sensor heating mode as well as selection and adjustment of the electrical outputs.
Applications
Wood Kilns
Pharmaceutical and Food Processing
Livestock Applications
Mushroom Farms
Environmental Chambers
Metrology In Harsh Environments
Dirty Or Corrosive Environments
Areas Of Continuous Condensation and High Humidity
Key Features
Rugged, heated monolithic measurement cell, with programmable duty cycle depending on environment
Fast recovery after heating
Heating feature can act as a chemical purge in harsh environments
Range of 0-100% RH, -40 to 356ºF (-40 to 180ºC)
Operates in condensing conditions
Operates in pressures up to 1450 psi (100 bar)
Calculates a wide range of moisture values
Optional sensor coating for harsh environments
Optional Eithernet connection
Optional separate temperature and humidity probes
品/2210壁掛式洗眼器.jpg)
本月特價
分享儀器
境生態檢測儀器/dc7000露點儀.jpg)
境生態檢測儀器/xdt-nema在線露點儀.jpg)
境生態檢測儀器/dmt242b露點變送器.jpg)
品/03300通用型硅質脫模劑；12oz罐.jpg)
境生態檢測儀器/model ct1000-822 r-134a）危險氣體傳感器.jpg)
境生態檢測儀器/model pt9290-l91二氧化碳檢測儀.jpg)
隱藏對比框