絕緣油微水含量測量?jī)xKF-875

KF-875、KF-UNI KF-LAB

Karl Fischer 絕緣油微水含量測量?jī)x

一、主要特點

二、產品優勢
    超過20年的經驗和不斷的改進設計才有今天的Megger KF875，KF-UNI和KF-LAB絕緣油微水含量測量?jī)x。這些儀器的精確度都非常高。

     KF875和KF-UNI儀器都非常輕便，并且?guī)в写蛴C(jī)和運輸盒，使用和移動都很方便，得到的結果精確度也很高。KF-LAB是主要為實驗室使用而時間的，使用主電源供電工作，而且不帶內置電池和運輸盒。
 
三、產品應用

    對測試絕緣油的最優化設計是使用了一個特殊的重力0.875，KF875的操作非常簡單只需要操作者按一個按鈕，并把1ml樣品注入到測試單元中就可以了。

      KF875的一鍵式操作非常簡單，不需要特別的知識，也不需要特殊的訓練就可以操作。結果會顯示在儀器的顯示屏上，在內置的打印機上也會有水的微觀圖和結果單位是一毫克每千克（也可以是一克每百萬 即 ppm）
      KF-UNI允許樣本滴定的重力范圍在0.6到1.4之間，也允許樣本的尺寸不同。如果不需要打印也可以不用打印出來，打印出來的結果的單位是ppm，mg/kg，%和毫克。是根據樣本的重量，樣本的體積，樣本的重力來計算出來的。
      KF-LAB分析儀樣本滴定的重力范圍在0.6到1.4之間，他同時也能設置他的重力為最優化重力0.875。這就意味著在測試變壓器絕緣油時候設置很簡單，但是能用來測量的油的范圍卻很廣泛。
 
 
四、產品特征

KF875 KFLAB
Karl Fischer Moisture In Oil Test Sets

Over 20 years experience has led to the development of the Megger KF875 KF-LAB MkII Coulometric Karl Fischer Test Sets designed to determine moisture in oil, to provide highly accurate results on-site. The KF875 KF-LAB MkII are highly portable instruments, complete with integral printer carrying case, are easy to use provide highly accurate results.

Optimized for testing insulating oils with a specific gravity of 0.875, the Megger KF875 simply requires the operator to press one button inject a 1ml sample into the test cell. The simple ‘one touch’ operation makes the KF875 so easy to use that it requires no specialist knowledge or training to use it effectively. Results are presented on the instrument display on the integral printer in both micrograms of water in milligrams per kilogram (parts per million, ppm).

The KF-LAB MkII allows the titration of samples with a range of specific gravities from 0.60 to 1.40 also permits the use of different sample sizes. The KF-LAB MkII also has a default setting optimized for analyzing insulating oils with an SG of 0.875. This means it can be used to measure water content in a variety of different materials but is also easy to set up for transformer insulating oils.